Hinged Knee Brace Sizing and Strap Fit: Measure, Choose and Adjust

How to measure for an Essential Wellness hinged knee brace (Medium, Large or XL), line up the side hinges and adjust the four straps for a comfortable fit.

A hinged knee brace gives a firmer, more structured feel than a soft sleeve, so getting the size and strap tension right makes a real difference to how comfortable it is to wear. This guide covers how the Essential Wellness Hinged Knee Brace is sized, how to measure, and a general approach to fitting and adjusting it.

What the hinged design gives you

The product page describes this as the most structured support in the knee range, for days when you want a firm, reassuring feel. It has metal hinged bars on both sides of the knee, which the page says limit side to side movement while letting the knee bend through its natural range, plus reinforced support around the kneecap, breathable fabric and four secure straps.

The page lists the following as everyday uses: wear at home and work, extra support on demanding days, walking on uneven ground, lifting and carrying, and active days out.

How to measure for your size

The product page gives one measuring instruction: measure all the way around the lower thigh, 10 cm above the kneecap. Use a soft tape measure, keep it level and snug without squeezing, and note the number in centimetres.

The page lists three sizes by their maximum width:

  • Medium: maximum width 42 cm, listed as suitable for most.
  • Large: maximum width 52 cm, listed as suitable for fuller or muscular legs.
  • Extra Large: maximum width 62 cm, listed as suitable for larger legs.

If your measurement sits close to the top of one range, compare it with the next size on the product page, or look at the Essential Wellness size chart. The page also has an "Unsure about size?" link, and easy size exchanges: send it back (you pay the return postage) and your new size is posted free of charge.

A general approach to fitting

The steps below are a general approach for getting a snug, comfortable fit, not manufacturer instructions. The product page includes a how-to-fit video, which is the best guide for your exact brace.

  1. Sit on the edge of a chair with your leg relaxed and your knee slightly bent.
  2. Position the brace so the hinge on each side sits level with the middle of your knee, with the kneecap support centred over the kneecap.
  3. Fasten the straps one at a time rather than pulling any single strap tight first.
  4. Stand up and take a few steps. The brace should feel snug and stay in place without sliding down.
  5. Adjust the tension of each strap a little at a time until it feels firm but comfortable.

The page says the brace has four points of adjustment, so you can add more tension on days when you want a firmer hold and ease it off when you want a looser feel. If any strap feels uncomfortably tight, loosen it.

You can also watch our how to fit a hinged knee brace video.

Wearing it through the day

Because the brace has a structured frame, it is more noticeable than a soft sleeve, so many people find looser trousers or shorts the most comfortable choice to wear over or around it. Take a moment to check the hinges stay level with your knee after you have been sitting or walking, and re-tension the straps if they have loosened.

Care and cleaning

The product page lists the brace as machine washable, with a cold hand wash and do not tumble dry, and says the reinforcing hinges are removable. Because the wording lists both machine washing and hand washing, follow the care label on your brace if it differs, and take the hinges out before washing. Our guide to washing supports covers a general hand-wash routine, and the everyday knee support care guide covers the wider knee range.

If you are comparing knee supports

If you are not sure a hinged design is the right feel for you, our knee supports comparison sets the options side by side, from soft sleeves to structured braces.

View the hinged knee brace

Check the product page for the current sizes, care wording and returns information.

Frequently asked questions

How do I measure for a hinged knee brace?

Measure all the way around the lower thigh, 10 cm above the kneecap, as the product page describes, then compare the number with the Medium (42 cm), Large (52 cm) and Extra Large (62 cm) maximum widths.

How many straps does the hinged knee brace have?

The product page lists four secure straps with four points of adjustment, so you can set how firm it feels.

Can I change the size if it does not fit?

The product page describes easy size exchanges: send it back (you pay the return postage) and your new size is posted free of charge.